Technical Data
Compressibility
The % of deformation just ASTM F-36 after an initial compressive load is set
Recovery
The amount of material springs back after ASTM F-36 release of a compressive load.
Creep Relaxation
The amount of deformation over a period of time, ASTM F-38 after a compressive load is set.
Hardness Rockwell Shore D-2
ASTM D-1700
Elongation
ASTM D-638; % of Failure When Elongated 2″ per Minute
Tensile Strength
ASTM F-152
Specific Gravity
ASTM D-792
m - y values
- P X T = Max. Pressure (psi) X Max. Temperature (F)
- 350,000 (1/32″ & 1/16″) 250,000 (1/8″)
- Temperature Limits -350F to 500+F
- Pressure Limits @ Max. Temp = 1200 psi, 800 psi for E-140 only
- Pressure limits @ Max. Temp = 1400 psi for E-900
- The M and Y Values for E-110, E-600, E-900, E-140, and E-250
| E-110 & E-600 | E-110 & E-600 | E-900, E-140 & E-250 | E-900, E-140 & E-250 | |
|---|---|---|---|---|
| M | Y | M | Y | |
| 1/32" | 3.75 | 7600 | 3.5 | 6500 |
| 1/16" | 3.00 | 4500 | 2.70 | 3500 |
| 3/32" | 2.50 | 2900 | 2.25 | 2200 |
| 1/8" | 2.25 | 2200 | 2.00 | 1600 |
The data set forth in this presentation is typical. The users specific application should be combined with independent study and evaluation for the materials suitability. E-600 Fluorogreen, E-110 Fluorogreen, E-140 Fluoroblue, E-250 Fluoromaroon are registered trademarks of United Fluoro Components. All Fluorogreen products are made in the U.S.A.